ENGINE POWER
At flywheel 65 Hp
OPERATING WEIGHT
With 6.00-16 front tyre, 14.9/13-28 rear
tyre, hydraulic lift with three point linkage
System cat 1-2 square type
Fender with flat top. 2070 kg
ENGINE
FIAT 8035.05
4-Stroke diesel engine direct injection
Number of cylinders : 3
Bore and stroke : 104 x 115 mm
Piston displacement : 2,931cc
Max torque at 1500 engine Rpm. (216 NM (22 Kg)
Distributor type Fuel injection pump
Dry-type cylinder liners
Cooling system : Water
Three-row brass tube and copper fin radiator.
Force-feed lubrication system,
Distributor type injection pump with
Mechanical speed governor.
Oil-bath air cleaner with semi automatic
Type dust unloader pre cleaner
Vertical exhaust muffer.Hand and foot accelerator
CLUTCH
Dual plate, dry-type with separate controls
(Pedal for transmission and hand lever for
PTO)
Diameter of plates : 11”
SPEED (km/h)
With 6.00-16 front tyre and 14.9/13-28 rear tyre
FORWARD
1st creeper*
2nd creeper*
3rd creeper*
4th creeper
1 st low
2 nd low
3 rd low
4 th low
1 st high
2 nd high
3 rd high
4 th high
Reverse
Creeper*
Low
High
*Optional |
0.9
1.4
2.1
2.8
3.0
4.5
6.6
8.6
10.9
16.3
25.0
35.0
1.4
4.3
15.6
|
TRANSMISSION
Gearbox: 8F +2R speeds
Gearbox with constant – mesh gears
Synchromesh on 3rd, 4th, 7th and 8th
Speed, Double control lever
Differential with mechanically operated
Look, spur gear final drivers.
BRAKES
Service: disc type, Oil bath, mechanical control, simultaneous or independent operation
Parking: dependent, operating on service Brakes, with hand control lever and flashing warming light
FRONT AXLE
Telescopic type, inverted U section
Variable tread with heavy duty box section type front axle support |
|
STEERING
Hydrostatic power steering
With independent circuit
Turning radius:
-with brakes : 3.000mm
-without brakes : 3.800mm
POWER TAKE OFF
Fully independent:
1-3/8th 6 splineshaft, 540 rpm at 1970 Engine rpm
TYERS (Parkina Of Tyre )
Front: 6.00-16
Rear 14.9/13-28
TREADS
Front (5 Positions):
1,410-1,510-1,610-1,710-1,810mm
Rear (6 Positions):
1,400-1500-1600-1700-1800-1900mm
HYDRAULIC LIFT
Lift-o-matic, automatic, with draf, poition and mixed control, draft control through the top link, pump capacity 34.5 L/min. (Max.) Relief
Valve opening pressure, 190 kg /cm2
Automatic lifting and lowering device.
Lowering Speed Adjustment and transport lock,
Lifting capacity. 2200 kg.
Auxiliary control valves (Single and double acting) with ½* quick couplings.
*Optional
DIMENSIONS
(WITH 6.00-16 AND 14.9/13-28 TYRES)
ELECTRICAL SYSTEM
Voltage : 12V
Starting motor : 4 HP
Altemater : 400 W
Battery : 110/120 Ah
Starter safety switch
Cold starting-aid device thermostat*
High-low beam headlights.
Parking, direction, stops lights.
Multiple gauge instruments panel
Rear floodlight
2-Ploe power connector*
*Optional
BODY
With “Square” hood, fully forward tilting for max accessibility.
DRIVER SEAT
Deluxe, with parallelogram suspension and hydraulic shock absorber, adjustable to driver’s wight, reach and height
CAPACITIES
Fuel Tank : 61.01
Engine Oil sump and filter : 7.311
Rear transmission and
Hydraulic lift : 30.11
GENERAL FEATURES
- Efficient and automatic hydraulic system with latest technology of liftomatic
- Excellent Fuel consumption
- Heavy duty oil cooled disc brakes
- Adjustable and comfortable driver seat
- Hydrostatic power steering
- Tip up engine hood for maximum access to engine service points
- Heavy duty front axle support
- Advance and move visible instrumental panel
|
|
