ENGINE POWER:
At Fly wheel 65 HP
OPERATING WEIGHT:
With 6.00 - 16 and 14.9/13-28 tyres, hydraulic lift with 3 - point linkage cat. 1 - 2, square type fenders with flat top: 1,770Kg.
ENGINE:
Fiat 8035.05
4 - Stroke, Direct Injection Diesel.
Number of Cylinders: 3
Bore and Stroke: 104 x 115 mm
Piston Displacement: 2,931 cu.cm
Compression Ratio: 17:1
Max. Power at 2,500 Rpm: 65HP
Max. Torque at 1,500 Rpm: 22.7 Kgm
Dry-type Cylinder Liners.
Cooling System: Water
Three-row, brass tube and cooper fin radiator.
Force-feed lubrication system.
Distributor-type injection pump with mechanical speed governor.
Four-bearing crankshaft.
12 Volt Starting System; 4 hp motor.
400 Watt Alternator
100/103 Ah battery, located in front of radiator.
FILTERS:
1) Air Filter: Oil-bath with pre-cleaner semiautomatic dust unloader;
2) Fuel Filter: 2 replaceable cartridges;
3) Oil Filter: Easy-to-change, full-flow cartridge.
Vertical exhaust muffler
Fuel tank capacity: 54 Liters
CLUTCH:
Dual Plate, dry type with separate controls (paddle for transmission and hand lever for PTO).
Diameter of plates: 11in
TRANSMISSION:
Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds.
Synchromesh on 3rd, 4th, 7th, and 8th speeds.
Differential with pedal actuated lock and automatic disconnection.
Single-reduction spur gear final drives.
Gear box mounted starter safety switch.
BRAKES:
Service: Dry, band-type, mechanical control.
Parking: Manual lever on right side of operator.
FRONT AXLE:
Telescopic type, inverted U, variable tread.
TREADS:
Front (8 positions):
1,320 - 1,420 - 1,520 - 1,620 - 1,720 - 1,820 - 1,920 - 2,020 mm
Rear (8 positions):
1,200 - 1,300 - 1,400 - 1,500 - 1,600 - 1,700 - 1,800 - 2,900 mm
STEERING:
Hydro assisted, power steering with Independent Circuit, Turning radius:
- with brakes: 3.1 mm
- without brakes: 3.9mm
DRIVER'S SEAT:
Cushioned Spring Suspension; adjustable. |
|
POWER TAKE-OFF:
1 - 3/8" 6 spline shaft.
Fully independent: 540 rpm at 1,967 engine rpm.
High-speed DTO* (1 - 3/8" Shaft): same speed as engine
(*) for application of belt pulley
HYDRAULIC LIFT:
With draft and position control.
Draft control through top link.
Gear - type pump driven from engine crankshaft.
Pump capacity: 22.7 liter / min.
Relief valve opening pressure: 150 - 170 kg/sq.cm.
Manual Response control.
3 - point linkage cat. 1 - 2
Lower links with sway restrictors and transverse retaining spring.
Control lever with safety stop.
Max. Lifting capacity: 1,650 Kg
TYRES:
Front: 6.00 - 16
Rear: 14.9 / 13 - 28
BODY:
Hood with side-hinged cover for engine inspection.
Front grill is easily removable for quick access to air cleaner and battery.
INSTRUMENT PANEL:
Separate temperature gauge, fuel gauge & tachometer.
LIGHTING SYSTEM:
With 3 -position headlights.
Head Lights Mounted in Front Grill.
2 pole power connector (ASAE)
Blue high beam warning light on dashboard
Big Indicator, Parking & Hazard lights
SPEEDS (KPH):
With tyres
Forward Speed
Reverse Speed |
14.9 / 13 - 28
3.0 / 31.5 kmph
4.3 / 15.5 kmph |
| |
DIMENSIONS:
(with 6.00 - 16 and 14.9 / 13 - 28 tyres) mm |
A Wheelbase
B Overall Length
C Height to top of hood
D Height to steering wheel
E Front tread (8 positions)
F Read Tread (8 positions)
G Ground clearance under front axle |
1,920
3,013
1,390
1,490
1,320 + 2,020
1,200 + 1,900
480 |
STANDARD EQUIPMENT:
Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator's manual
OPTIONAL EQUIPMENT:
- Front End Weights with Frame
- PTO Pulley (AGRIPAK Design)
- DTO Pulley
- AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
- 9 Hole Draw Bar
- Pintle/Trolley Hook (AGRIPAK Design)
- DTO Suction Pump
- High Clearance Kit
- Driver's Cabin |
 |
